SIR IUS LED H11 H9 H8 LED Canbus Decoder cancel error message fix led bulb on and off flickering problem adapter pack of 2

This worked like a charm, stopped all flickering and made the lights even brighter because the voltage is much more steady. My 2011 Jeep Grand Cherokee has the setup for xenon or HID, but would rather use the LED’s. The ballasts for the HID are designed to heat the element in short bursts of voltage causing the “flicker”. This product normalizes the voltage to the lights and stops the flicker. They “seem brighter” because the voltage is now continuous to the led or halogens and will stop the flicker because they aren’t being turned off and back on in milliseconds.

Installed some Fahren low beams and these fixed my flickering! (2011 Jeep Grand Cherokee Laredo)REMEMBER to flip the connector if the light doesn't turn on after install.

Bought some LED low beam headlights...Install and did not work correctly...Did some research and found out the Canbus wasn't setup to accept them Did more research and found out I need them...Installed them and everything works fine now...

Easy to install depends on your application. These are kind of bulky, so space could be an issue for you. Mine wasn’t bad on my E92 led fog bulbs. They worked fine to get rid of the dash error. I tried this setup on my Volvo as well, error went away, but would have been more difficult to install with the way they do their lights.With all that said, I found other LED bulbs from Fahren here on Amazon that don’t require a CANBUS that I used on the Volvo’s regular low beams. They were a smidge more expensive than the bulbs I already had that needed this CANBUS, but are worth it to not have to deal with this item.They absolutely solved the problem I was having. If you already have LED bulbs throwing errors on your dash, this fixed it for me, but springing for the slightly more expensive bulbs is my recommendation.

Sucks that you have to get these if you want to switch from halogen to led but they do stop the flicker. They’re small enough to fit inside and seal the bulb housing but just enough.

This canbus decoder works extremely well. I've purchased resistors before, none worked as well as these did. My leds retrofitted in my mini clubman flickered horribly before, now I get no issues. So far no issues with heat, though i haven't tested how hot these actually get while in use. Overall, if your car doesn't accept leds well, these may be worth the purchase to fix any flickering issues you may have.

Installed these in June and stopped working less than 6 months later. lights alternate blinking and then just shut off. I reached out to seller and will update once I hear their solution

Works on my 2013 ford escape, kept getting issues only with my low beams and now after using this they work. The decoder itself isn’t big so I can tuck it inside with the bulb and so I’m able to put on the dust covers on with no problems.

Tenía problema de que las luces flasheaban cuando las apagaba, ahora se eliminó ese problema.

error free, works well

Compre para una jepp Compass 2015 ya no parpadea recomendado

Ensure compatibility before purchaseCreated a flicker in my headlampsSeller quickly remedied issue with an added device to remedy the flicker issueImpressed by speed of resolution to my issue

Excelente buena calidad en espera de cuanto aguante