PC Addressable RGB LED Strip Lights Kit - Magnetic PC Case Lighting, 2PCS 42LEDs ARGB Strip for 5V 3pin RGB Header Motherboard Asus Aura, Asrock RGB Led, Gigabyte RGB Fusion, MSI Mystic Light

The light bars are legit and signal let's me have full control over all of the leds. You can set this up as one longer addressable strip, or two sets of leds that can be independently controlled. The magnetic brackets work great on my steel Antec case, but obviously can't work on aluminum.

I have had my PC for a while now and I don't have any single RGB component in it sadly (as a matter of fact, no lights at all). Eventually, I decided that needs to change. The days of putting my PC on the floor is over and I put it up on my desk for better air circulation and just for show as well... but there's nothing to show (it's hard to see through the side glass since it's tinted). That leads me to purchasing these LED neon strips that plugs right into the 12v LED connector that was already supplied from my case (since the front fans were RGB). The setup was relatively easy, magnets were strong enough to hold the lights in place (it was a bit tricky since I had to squeeze my hands through my case to position it, but that's just a me problem, not a product problem). Everything was plug and play, the 4-pin connectors all work wonderfully and even though I'm using the Cooler Master LED control that was supplied by the case, I'm sure that you can use the JLED connectors on the motherboard to controller it with something like Mystic Light for MSI or any other controllers for your motherboard. I recommend this product, lights are bright, magnets hold, and I'm satisfied.

Just installed my second set of this specific LED strip in my main rig. I like the appearance, the installation went OK. A few issues:The screw holes for the mounts are ~.5mm oversize for most screws. The holes need to be a touch smaller to properly interface with screw heads so they don't just pull through.The second set I received appears to be wired backwards from the factory. I'll have to either jam the connectors together or disassemble/reassemble the connectors to get them to behave in sync with the existing sets.

Works great in a Thermaltake Tower 600! There is grooves on the inside where these strips fit peefect, no double side tape or magnet mounts are needed. They are bright and smooth even lights.

The media could not be loaded. These LED strips are a fantastic addition to my computer setup! They came with clips that hold them securely in place, making installation a breeze. The lighting looks incredible, and they sync perfectly with my RGB desktop app, allowing me to customize the colors and effects with ease. Overall, they’ve transformed my PC, and I couldn’t be happier with how they look and perform!

Nice and bright, light travel direction arrows, looks cleaner than clear strips, and mounts well.If you have never installed RGB kits before, watch a few YouTube videos showing how FIRST. While over all it is very simple, it can damage your board or lights if you get controller connection mixed up with power connections.Pros:PriceAdhesion...they are not meant to mount using magnets alone, they are not that strong. You are supposedto peel the backing off, and the magnets help keep the strip flat (as they arrive coiled, and tend to want tocurl). The adhesion + magnets work much better than either would alone.ConsInstructions are outdated and vague. Pictures showing what connectors are used on what boards can bewrong (maybe right on older boards?). Look at pins on your board to determine what connector you need.

The media could not be loaded. When you have it on the solid color both strips work but when you have it on multiple color, only one and the other one only go halfway so that’s the reason why I’m giving it a three star

The media could not be loaded. They are bright and sync well make my badass pc look even more badass