CGOLDENWALL 4.5KW Luxury Self-draining Steam Generator Shower Sauna Bath Home Steam Bath Spa Generator with waterproof Control and Auto Drain 95-131℉ for Suitable space heating 160 cubic feet (4.5KW)

I bought an earlier version of this steam generator 4 years ago, which provided good service until the water level detector failed, so I bought a new one! The new unit is far superior to the first one, though is the same size -- I was able to swap out the main steam unit without changing wiring or plumbing at all! It fit perfectly.There are also improvements -- the controller was updated and there is a new kind of steam head that diffuses the steam into a dense cloud with just the right size water droplets to quickly fill my steam room -- diffusing the steam better so there are no hotspots, and so the steam diffuses more evenly.I strongly recommend this steamer -- its' the best purchase of anything I bought this year. Oh, I almost forgot to mention the company included an extra heating element, level switch, input water controller, temperature sensor & control unit.

Ordered for a home shower (4’x5’). Easy installation, electrical was tricky, but customer service was great and walked me through and provided everything I needed quickly. Would buy again

I didn't even install the unit I open the box and realized the unit has been installed and appear to be returned in bad condition also was no steam outlet I had no choice other than return it

great!

This is a review one week after installation.I knew it would be a bit of gamble with anything made in China by a Chinese company. It works mostly as advertised. But there are things/improvements left to be desired.After receiving the unit, I was most concerned if the water tank is made of stainless steel and is well made. So I opened up the unit to inspect. Luckily the tank is made of 405 stainless steel although the walls are a bit thin in my opinion. The welding work looks fine to me. I would have return it otherwise.The other thing I see immediately afterwards is the lack of insulation around the water tank. There are insulations on five sides. But there is none on the side where the pipes are coming out. I had to buy insulation material and fill in on my own.The punch-out for the electrical wiring sleeve is barely cut. There is no way to punch it out easily. I had to drill a 1 inch hole myself.There is no instruction on how to use, install the steam outlet. It looks well made. But I thought it was unusable in the beginning. After a while, I figured it all and was quite pleased.The controller is very basic. I wish it allows me to adjust the turn-on, turn-off temperatures. The turn-off temperature can be set. But the turn-off temperature is hard-coded to 5F below the turn-on temperature. I also wish there is a timer for the steam session. The double sided tape on the back of the controller, which holds the controller to the wall, disintegrated in steam environment. I had to take it off and use silicon caulking instead. So it doesn't work as-is inside the steam chamber.There is an electric water valve behind the water inlet. It turns off very abruptly every time. That causes water knocking pretty badly. It happens frequently during the steam generation, which is very annoying. I had to install a water pressure reducer and a flow limiter to fix this problem.Other than these, it works as advertised. I enjoy the steam sauna very much. It is only one week after the installation. I hope it will last.

Assisted me with unique installation challenges!

Product works great !

- does not work, followed trouble shooting instructions, still no power to unit.- no neutral wire, violates Nat. Elec. Code and potentially dangerous.- would not work with out neutral wire, I tested with multimeter and confirmed power to unit (using ground).- install is cramped and difficult, unless you have a lot of space (mine sits next to shower, not out in the open).- photos in instructions are not of the unit, this was evidently knocked off another company.- after 2 days of difficult install (including drilling holes in my shower tile) I returned it and paid $1,100 for a better one.