Dual Wireless Phone Charger for 2017-2020 Tesla Model 3 and Tesla Model Y, 1st Center Gen Console Charging Pad -Works with iPhone 16 Pro Max and iPhone & Android Phones with MagSafe Cases

I’ve had my 3 since 2019 and over 86k miles, the whole time coping with a poor iPhone charging setup: the car did not come with wireless charging, and my first aftermarket solution didn’t work well with newer phones that have large camera modules: I was having to place the phone upside down and even then it would sometimes slide out of position and stop charging.This charging pad wasn’t cheap, but it works perfectly: it fits snug, holds the iPhone 16 securely (and right side up), and charges it reliably. The lid still closes with the phone inside, even with a thick case.

At $99 it’s a bit overpriced but it’s a high quality product and works as expected.My new iPhone 16 Pro Max (with case) fits perfectly on it and gets charged. The magnet is also strong enough to hold the phone in place.I was also able to fits two iPhone 16 pro maxes side by side in case you want to know.

First off, let me say that as an iPhone/Apple user, this was the most appealing charger solution for my M3 2018 after looking at at least 4-5 different options on Amazon and YouTube reviews. I really wanted MagSafe as I feel that is a feature not even the new Gen 2 consoles have. When it comes to looks and esthetic design, it’s about perfect.Here are my somewhat nit pick issues, but also some positive aspects to them. The pucks are both the quality you would expect from an Apple MagSafe in my opinion. Strong magnets. It fits my 13 pro max with Apple leather case perfectly. I am confident an Otterbox symmetry plus would probably work too. However, I originally, had some issues. (update: issue is starting to happen again). When I charge on the left puck, then pick my phone up and switch to the right one, the right one won’t work. I’ll go back to the left and the left still works. I would unplug the unit, disconnect the included C to A usb adaptor, and plug back in. I would say this fixed the issue 3 out of 4 times I had the issue. One of which I had to redo the process twice before it fixed. I have yet to have that issue again. (Happened again this morning 5/19/23)Part of me is concerned if the usb C to A adaptor that was provided is not working or is rated high enough to give both chargers 7.5watts to both sides at the same time, and maybe that’s why when i use one side, the other one stops working occasionally. I’m confident if my car was usb C it would work great. I just cannot confirm if it is the adaptor to usb A that is the reliability issue yet. Maybe I had a dirty or bad connection so we will see. With more time.Second: This is my actual major gripe that has caused 4 rather than 5 stars(update: intermittent charging issues including this is now 4 star reason, but i think those can be corrected and seller is very communicative). The product is a gloss black back finish completely flat. With the Tesla, I think the center console Gen One has had different designs ever so slightly where the phones go from 2017-2020. My description here is specifically for 2018 m3 mid range (premium interior) and DID NOT come with Tesla wireless charging. Just a rubber mat.Once the original runner pad may gets removed, and when you do that there are little rubber plugs or stoppers that keep the original mat in place. Also, there is pathing for the wired charging that came with vehicle). Twraps should provide stick on stoppers identical in size and position to the OEM rubber mat (similar to the material of the black foam that the product package was lined with). I have actually considered cutting the original package to make these little inserts myself to double side tape on the back.At an absolute minimum, there needs to be a felt or two sided low strength 3m take included with the product for the back. They provide a very nice screen cleaning cloth instead? Get rid of that and add nice quality 1-3 pound strength 3m double sided tape or something designed to keep the product in the OEM holes of the original May’s place.Without a fix for that, your magnets for MagSafe are so strong, the pad’s top section has a little give if you do not pull the phone off at an angle. (And yes the bottom of the product was properly installed with the black shiny lip overlapping the bottom) The bottom however is good and stays in if installed with video instructions very well.Because of this problem, if you are aggressively driving, or if you hit a pothole, you occasionally get the ever so slight clatter of it not being securely padded on the very top underneath, and it’s plastic on plastic so it makes sound. (Seller has contacted and said they would provide 2 sided tape with product in future.) The left and right edge may be able to fit a small amount of stick on tape or something as well, but if the back was taped or if little rubber pieces were included on the unit that lined up with model 3 oem holes, nothing else would be needed for left and right movement.Overall, I think if it would have had some extra design elements for figment… it would be even better in my eyes to the Gen 2 console charger, and other wireless (non MagSafe) options, and keeps phone charging position much better. But I also understand this gen 1 console is not worth retrofitting anymore because it’s no longer in new models… so please at least provide the tape. I’d prefer those to the nice packaging and screen cloth.(Seller has opened communication with me to fix some concerns, will provide tape in future, and wants to hear more of my thoughts. Very very sincere seller and very happy even with current version even as is. I think this was the best looking and theoretically functional idea of all the chargers I’ve seen, and wanted to provide ideas to make it perfect in the future.)Lately, I paid $100 and you dropped the price the next day to $89. Would you provide me a credit so I don’t have to return, then reorder the product?(Update: this was honored immediately)

Works perfectly and unlike my old one the magnet holds the phone where it needs to be to stay charging

I got this for my iPhone 15 Max Pro, with an ARC case. I was concerned that it wouldn't work with the ARC case one. The ARC case has a "minimal" design, with just a piece on the bottom, and on the top (going around the camera). I was concerned that the bit on the bottom would push the phone out too much so it wouldn't hit the magnet, but it works just fine... This looks nice and is easy to install. I would recommend this to anyone with a Tesla Model 3 and a compatible phone.

Takes a lot to charge just 1-2 %

This works as well as I expected and looks better than I expected. I have used two previous models of similar pad in my car but not with MagSafe until now. The cutout at the top is great for accommodating the thick iPhone cameras. I use this with both an iPhone 16 Pro and an iPhone 13 mini and it works great.

Really great concept. There are some things they can improve on if they care. FIRST - please work on the pads getting super hot (this heats up the phone). SECOND - Please allow the need for only one USB C cable instead of two. This can be done and has been done.Other than those improvement requests, it's a great concept and does its job albeit with some heat.EDIT: The heating issue is actually only happing on pixel devices. All in all very happy with product and with the help of the seller.