CHIPTRONEX Acrylic Z810 Micro ATX Gaming Cabinet USB 3.0 Gaming Case, Computer Case, Cabinet for Pc, Pc Cabinet, Cabinet RGB, RGB Light, Matx Mitx Motherboard Support (Case Without Smps), Black

The media could not be loaded. The size of the cabinet is very small but if you have correct placement then it's a killer cabinet.I'm using gtx 1660 super card and ant esports 500watts psu. And a custom antec air radiator cooler. And it's perfectly fit for the components. No issue.Pros :1. pre installed 2 rgb fans.2. Has side tempered glass pannel. Looks awesome.3. Easy to assemble.Cons:1. Size is very compact but it's no matter.2. Should have given a rear fan too, but it's a great deal for 2k guys.Final verdict:If you are looking for a pc buit at low cost then it's a must buy guys because of it's build quality.

Cabinet is good. It comes with 2x 140mm static RGB front fans (but no exhaust fan).Things that are a bit of issue :1. The rear exhaust fan ins not included and even the size of it not good the rear fan size is of 80mm which is not at all good in 2023.2. Cabinet is very light weight I can lift it with just one finger as you can see in the picture so don't expect that much.3. Cable management is a bit hard side because there isn't much space in the right side of the cabinet so that 24pin wire is really a task to manage although I did with multiple zipties and all.

So i bought this a few weeks ago and have been using the cabinet for 2 weeks i use an i5 9110f with a 1050ti which i will be upgrading soon. The cabinet is actually pretty nice for the price if you have seen a few videos about building a pc the process is going to be very smooth. I only have one problem you can install the hdd in the hardrive (if you have a problem installing it the railing system is screwed in from the bottom personally took me some time to install it) but you have to install sata ssd's in the front, thankfully i have a nice looking ssd but if your ssd doesnt look good then it might affect your looks. the psu shroud is beig enought to fit in a 1200w corsair power supply (you can easily install small sized psu's) the shroud eve has some dash shaped holes for the front panel connections and power reset and led switches. you can also sync the rgb with your motherboard which i highly recommend doing. overall a VERY NICE cabinet and for its price its amazing my temperatures were very bad they hovered in the high 70's when idle and mid 80's when gaming after switching to this the maximum temperature i get is 45. i actually recommend buying this over ant esports ice 511-MT as it offers more space for cable management and the rgb is better. hopr you find this useful thank you.

I order the the matx cabinet and after setting everything up for 2 hours when i fired the power button rgb for a fan is not working. Checked the connections and still no luck. Had a call with Amazon for 1 hour and they asked me to send pictures and details of the issue i'm facing and asked me to wait for 3 days. I did as they said and when i called them after the wait period they denied to accept the return. Please dont purchase this product.मैंने मैटएक्स कैबिनेट का ऑर्डर दिया और 2 घंटे तक सब कुछ सेट करने के बाद जब मैंने पंखे के लिए पावर बटन आरजीबी चालू किया तो वह काम नहीं कर रहा था। कनेक्शनों की जाँच की गई और फिर भी कोई सफलता नहीं मिली। अमेज़ॅन के साथ 1 घंटे के लिए कॉल हुई और उन्होंने मुझसे मेरे सामने आ रही समस्या की तस्वीरें और विवरण भेजने के लिए कहा और मुझे 3 दिनों तक प्रतीक्षा करने के लिए कहा। मैंने वैसा ही किया जैसा उन्होंने कहा था और जब मैंने प्रतीक्षा अवधि के बाद उन्हें फोन किया तो उन्होंने रिटर्न स्वीकार करने से इनकार कर दिया। कृपया इस उत्पाद को न खरीदें.

Looking very good and built quality avarege but this price range good cabinet value for money I am purchasing rs 2099

It's great for the price. Small size. It had a dent on the right-side panel, pressing a little managed to fix most of it.Not much space in the right-side panel for cable management. Still, I managed to hide most of it as shown in the picture.Remember, small graphics card will be ok, but long powerful ones will not fit.At first only top fan's RGB light was working. Then I reconnect the fan cables as shown in the image, with the white one between power and the fans. The directions written on the white part should be reversed, it can't be fitted that way. After that both fan's RGB lights are working.Got it for less than 2.136K, awesome.

It's look simple and beautiful.Good product

The looks very premium with the metal and glass construction. The front mounted fans cannot pull any air due to the enclosed nature of the glass front panel. Cable management is also a tremendous challenge as the area behind the motherboard tray is inadequate. The graphics card is affected the worse as the cabinet is incapable of exhausting the generated heat due to lack of airflow. Suitable for low power components only. For reference 1660 super illustrated hovered around 65-75C under load when it was initially placed in a Deepcool Kendomen mid tower cabinet with good airflow. In this cabinet it has rises to 90c under load. The cabinet comes with rgb fans which were not used in this particular build so cannot comment on their quality.Compatibility:Fans: 3 120 mm fans can be mounted, 2 intake, 1 exhaust.CPU heatsink: Any 120 mm based heatsink/AIO will fit with sufficient clearance. CHIPTRONEX Diffuser x500 RGB used in the build.GPU: 3 fan/3 slot cards will barely fit. Best stick to 2 slot/2 fan cards.Drives: Avoid HDDs if possible. Due to the space constraint HDDs take up a lot of room and further limit what little air was passing through. Limited mounting locations, either below the GPU or on the rail behind the fans.Very compact and attritive case. Only purchase for aesthetics or tight space constraints. Don't recommend for demanding workloads as sustained heating will eat into the components potential lifespan.