Twotrees PEI Sheet Double Side Textured Smooth 235x235mm PEI Bed for Ender 3 Ender 3 V2 S1 Ender 5 CR20 Genius Mega Pro Aquila C2 S2 X2 Kobra Neptune 2 LK4 Shark V2 Odin-5 F3 Magnetic Print Bed Plate

This was one of the best upgrades for my Monoprice Maker Select (Wanhao i3). Prints stick very well to this. Before I got this, I had been peeling off prints with a knife off the build plate. The first time I pulled this product off the build plate, bent it a little, the pieces just.... Fell off. I literally laughed in joy and ran out to show my wife (who absolutely did not care) so here I am to share my joy with you.I've used it for about 2 days of print time now, and still love it. I usually do not write reviews but I hope this helps someone else. Tip- if you have a Monoprice Maker, just cut the corners off the magnetic part that adheres to the build plate. The top part sticks over the corner bolts perfectly.

I have been having constant adhesion problems. I have used Blue tape but print was difficult to remove item from print bed. The magnetic attraction to the plate holds the plate perfectly. The magnetic sheet is self adhering with adhesive to the OEM glass build plate. You need to re-level the bed again after installing the magnetic sheet and the metal build plate. Once this is accomplished, the metal build pulls off with ease, and can be bent slightly to remove the print.The included metal build plate has a textured surface on one side, and a smooth surface on the other. both surfaces work well.So glad I got this.

I almost got rid of my 3d printer to upgrade to a magnetic one, this is the best purchase I’ve ever made and the print feels so smooth and perfect

I used this to replace the PEI coating on the build plate of my Zyltech Gear V2. Its not listed as being a compatible printer but it has the same build volume as the CR10 so I figured id give it a shot. It works great! prints op off easily after a simple flex of the plate. It has a smooth and a textured side. Both sides work great for PLA, but PETG releases from the textured side much easier than the smooth side.

Edit: adding a star because the MFG reached out and sent me a better product. For flat sheet you want the one that is PET with the grid. I got it specifically because I am use to a glass bed and wanted something smooth with the option to go textured if needed. It's pretty to look at but I found out the smooth side will scratch if you sneeze on it. You can't use anything to scrape off your plastic, not even a plastic scraper or it leaves scratch marks all on the surface. I found this very odd so I only use the textured side which defeated the whole purpose. In hindsight I would have gone double textured. The textured side is great though, no issues with that side and it is durable, doesn't scratch and prints stick well and pop right off.

I WISH I had bought this magnetic bed plate sooner! I struggled with releasing PETG parts from my glass bed for a while (lessons learned!). Now I print and release PETG parts just as easily as PLA! The plate stays put on the magnetic bed of my Ender 3 Pro, and there is zero shifting around! The temperature transfer from the heated bed to this plate is much better than to any glass bed I've ever used! With this plate, I have not had to fiddle with glue sticks, or tape, or anything to have prints adhere to the plate. I only wipe it down before each print with rubbing alcohol to remove any oils from my fingers.Buy one (or more) of these plates. You WON'T regret it a bit!

Works great so far.

This is truly like magic do not hesitate to buy and place on your 3D printer as a bed replacement it is amazing. Stick print stick super good to it and don't have any difficulty coming off once the bed cools. I am printing at 60 for the bed and things stick so well that I have not had a single failure due to non-sticking prints. After the bed cools they pop right off with no issues at all it is truly amazing I don't know how I lived without this product before when 3D printing.

Bought the 310x310 for an Artillery3D Sidewinder-X2. I was having endless bed adhesion problems with the glass bed. Especially near the mounting bolts of the glass bed, this was causing prints to warp and release from the bed. This appears to be a common problem with this printer.After some research I decided to try this PEI build plate. I thoroughly cleaned the glass plate with dish soap and 99% Iso Alcohol before installing the magnetic base. The magnetic base was easy to install by pealing back the backing along one end, lining it up to the glass bed, and slowly releasing the backing while using a card to push out any air pockets.I do run the bed 5° hotter than recommended for the first layer and don’t run the fan for the first 3 layers (while using PLA)I do prefer the look of the texture on my prints, so I rarely use the smooth side and can't really comment on that side. Removing prints is very simple now that the plate can be removed and bent to “pop” the prints off once cooled.

La utilizo en un modelo de impresora que ya tiene sus años, facilita la impresión y el retiro de las piezas.

This is an absolute PERFECT replacement for the PEI bed that came with the Ender 3 S1 Pro. It fits perfectly and is magnetic like the original. There are 4 differences between this and the original. 1. This one has a single wide "centre tab" at the front for you to use to remove the bed, whereas the original one has two smaller tabs on the front, one on the left, and one on the right, for removal of the bed. 2. The laser etched logo on the face of the bed is different than the original (obviously) with neither logo affecting the bed or prints in any way. 3. The textured surface of this bed is just SLIGHTLY more rough than the stock Ender PEI bed. In the attached photo I have the same item printed. The left one was printed on the stock Ender PEI bed, on the right it was printed on this bed. Disregard the "shine" on the one on the right as the left was was in PLA and the right was printed in PTEG which has a natural "shine" due to it being PTEG. But notice the texture instead. This one has a slightly coarser finish to it compared to the original Ender bed which is slightly less coarse. I didn't even notice actually until I compared the two, and honestly both provide an absolute uniform and clean surface. Both beds provide a nice uniform and consistent look and feel. And 4. This one is almost half the price!! I would highly recommend this bed if you need to replace your stock one because your spouse destroyed your original bed by carving some nice deep lines in it with an improperly set Z-offest. Having been using it almost 24/7 for the past 5 weeks and not a single problem or issue! Buy this with confidence!

Me funciona perfectamente la compre para una artillery genius (compre la pieza de 22cm cuando debí comprar de 23cm xD) y aun así me funciona de maravilla. El imán es muy fuerte sin mencionar que solo retiras la pieza de metal para desprender la figura con facilidad y mantiene la temperatura de la cama bien.

This PEI plate has great adhesion and was the perfect addition to my daughter's 3D FDM printer. I highly recommend!