⚡ Power your HP workstation like a pro—no compromises, just pure performance.
This 24-pin female to 6-pin male ATX power adapter cable is engineered for HP Z230 and Z220 SFF Workstations, delivering up to 1000W through durable 18AWG tinned copper wiring. At 30cm length, it offers optimal cable management while ensuring reliable power transfer with a P6 connector tailored for HP motherboards.
| Manufacturer | Xiatiaosann |
| Part number | NR-XT-048 |
| Item Weight | 50 g |
| Package Dimensions | 13.3 x 10.8 x 2 cm; 50 g |
| Item model number | NR-XT-048 |
| Shape | Round |
| Wattage | 1E+3 |
| Amperage Capacity | 83 Amps |
| Item Package Quantity | 1 |
| Batteries included? | No |
| Batteries Required? | No |
K**N
Wrong Pinout for any HP model. Had to modify for it to work.
Make sure you check the pinout before plugging it in.I had to use a depinning tool to correct the P2 connectors pinout.I drew a pinout for the HP 600 G1 SFF psu from the official HP spec page, I have also attached the original PSU spec that shows the point of view of the mating side of the connectors.On P2 I connected Fan_cmd to Fan Speed pin as a link to prevent the psu fan error on startup.On P2 I then connected ps on and pwr good connect to the usual ATX pins on the connector. Green and Grey wires.For anyone following along at home I have included the pinouts for the USB 2.0 and 3.0 connectors too so you can bridge / solder the 2 pins that are presence detect so that the mobo won't warn about those either.*Technical extras. Inside the heatshrink is a 5vsb to 12vsb boost converter + a shottky diode from the 12v rail to 12vsb. 2A dc-dc switching ic name SDB628*
Trustpilot
3 days ago
3 weeks ago
