Partsam Speedometer Indicator LED Light Package Instrument Panel Gauge Cluster Dashboard LED Light Bulbs Compatible with Wrangler 1997-2006 -Blue

Installed in about 20-30 minutes in a 97 jeep TJ they look good, not over powering, shaved years off the dash.Pros: good look, updates older instrument panel, quick and "simple-ish" to installCons: really only 2 things, had to take off and on the cluster several times because the LED lights have to go in a certain way or they will not illuminate. Finally and probably biggest issue is the dimmer no longer is able to dim the new LEDs dash lights" unless my dimmer knob/switch is bad.(it's not)Overall good inexpensive update and has inspired me to change all the interior lights (AC/heat, courtesy, dome etc)

Love these lights. Put them in my jeep TJ to match my radio lights. Putting them in a TJ is a breeze just because this particular vehicle is so easy to work on. Installed in less than a half hour. Check the lights before you reassemble the dash because you might have to flop a led or two around. Unlike a normal instrument light these are polarized and only light if put in the proper orientation...and the only way to tell us to put them in and see if any are not illuminated. If the don't work clock them 180 degrees. They look great at night and are easier on the eyes than white.

Items arrived quickly and were as described. I watched a couple YouTube videos to figure out how to remove the dashboard and instrument cluster. It was fairly easy and really the only tool required was a Phillips head screwdriver. Two of the screws near the windshield were a little tricky to reach so I used a 1/4” socket and ratchet, but a shorter screwdriver would have worked just fine. I also used a needle nose pliers to gently remove and replace the sockets from the back of the panel to make it a little easier. Just twist the socket a quarter turn to the left and pull them out. Unlike the original incandescent bulbs, polarity does matter with these LEDs, so you need to test them before you completely reassemble the dash and flip any LEDs that don’t light up when you turn on the headlights. The large bulb included in the set is apparently for the gear indicator for Jeeps with automatic transmission. Very easy to install and looks great. The new instrument panel lights are brighter and easy to read, and they look great (just like the picture). They are also dimable so you can just rotate the headlight knob if they’re too bright.

Amazing brightness. Wish i could have gotten it in a diffent color but its installed now. Not super hard to change out. I have a 2006 wrangler i put these in and it improved it so much. I never realised how burned out the stock ones were till i put these in. because they are led you will have to play around with which way they are suppose to fit in. That means you have to put them in and plug the dash back in and see which ones burn and which ones don't. Little time consuming but not difficult at all. My dimmer switch doesn't work so idk if they dim at all. All i have is a toggle for on or off.

The lights wouldn't work after turning 180 degrees and trying again. As a last effort I bent the connectors to the opposite side of the bulb and they lit up and look great in my 97 Wrangler TJ.

Use all supplied parts! Do not use the old sockets with the new LEDs. First off I plugged the lights into the old sockets and only had 2 work. Even after rotating for polarity. I used the supplied sockets and the lights worked. I went ahead and replaced all the old sockets, now I'm a happy camper! The wiring harness on my instrument cluster was long enough for me to rotate it up and install each light and then check for operation. Noticed on some videos they completely unplugged the cluster, what a PITA. I recommend these LEDs, I'm very happy with the output they provide. Truly a good buy for the money.

Fits 2005 Jeep Wrangler (I have have X model). Quick shipping and inexpensive upgrade to the factory "green". My new radio is blue LED so I decided to change it all out to blue. Used this kit for the dash, and another one fit perfect for the AC controls  CCIYU 4x T4/T4.2 Neo Wedge 2835SMD LED Ice Blue Dash Climate Bulbs For 1997-2007 Jeep TJ Cherokee Wrangler Liberty . Easy install!! Took me about 60 minutes total because one of the a LEDs came out of the holder when I had remove to rotate so I had to disassemble the dash to get it back out. If you think one is "burned out", rotate it 180 degrees and it will work. Follow the instructions posted on many Jeep forums and your are set. This kit contained six LEDs total, five the fit the dash and another larger one that did not fit anywhere in the dash. Not sure what it is int here for, but fit in the holder in the foot well (once I removed it from the holder).

These lights are for the dash illumination only. if you want any other indicator loghts to work I suggest ordering and installing all at once.Awesome looking, super easy to install. I mean the back of the gauge cluster litterally marks what light does what. But make sure you try the light before screwing back in. LED lights have polarities amd you might have to flip a bulb or 2 if they don't come on like mine. If allowed I will put both pictures. From what I could read and put together the 6th bulb and socket is for Auto shifter illum light.