2 in 1 7000mW CNC 3018 Pro-M Engraver Machine,GRBL Control 3 Axis DIY Router Kit Plastic Acrylic PCB PVC Wood Carving Milling Engraving Machine with Offline Controller (Working Area 300 x 180 x

This is a very versatile little machine. Lots of features and all the accessories you will need to get started. I highly recomend this vendor. Very quick to respond to a question. One part had a mis-located hole and he quickly sent new set of parts that got me going quickly. I saw some cheaper units but all cheaper unit require you to get something else to complete, wether that be clamps, or cable ties or anything like that. Not with this kit. It has everything, including a roll of spiral cable sheathing to tiddy up the cables. I am impressed. Thank you for the well put together and nicely packed kit. I would purchase a few extra 5mm T-nuts as a few of the ones in the kit, had tight threads. I had some from a modification i did to my 3D printer and they are cheap to have a few spares. I think i will be buying another of these just like this for a small production I have planned.

It's pretty easy to put together, I don't know what all the fuss is about. Basically just look at the pictures in the "manual" they send with it. I was short one M3 screw, but had some at home, so no big deal. I did get a few extra screws, a coupler and a spring. So I guess they tried to make up for it.OK, I've had time to work with this and the seller. The seller is kinda hard to get in touch with, but that's Amazon's fault. Just hard to find them. Once I get in touch, they're pretty helpful.Overall, the machine is pretty good. *I* have to upgrade the motor, but that's me, I can't leave well enough alone. But if you're just starting down the CNC road, this would be a good beginner project. The machine is well built and I don't have any problems with it. *I* had some problems, but then again, that's me, doing stuff most people wouldn't be. I have to tinker with it and push the limits.But yeah, I'd buy it again. Seller has been very help with some of the issues I did have.

This is a good little machine FOR LEARNING. Use this to decide if CNC is right for you. If you get in to it, you will want to upgrade. Use locktite on the rod connectors as the drum screws can and will loosen. The spindle burned out after several weeks of constant use, but I expected that. The laser is great but requires a learning curve. I used pallet boards to learn on. I have since started buying 1x6 lumber for projects. I was hesitant to buy this at first, but I am not disappointed.

Purchased this machine in January but I'm struggling to get a decent job done through it.I've tried cutting using the stock software that came on the USB drive (Grblcontrol/Candle), Easel, LaserGRBL, Lightburn and for all my attempts, the XY axes stop moving while the Laser/Spindle continue burning/cutting. I've tried several USB cables including the one that came with the machine.Did I get a defective machine or is this a general issue with machines from Titoe?

We wanted to try this. We kept looking and this had the best reviews by far. It’s is difficult to use. We ruined a lot of projects before we got good cuts. The cuts we get are very simple. A snow flake or a simple owl.Don’t do it. Spend more for a better name brand machine. Sorry we waited so much effort in this one.You get why you pay for.

Haven't gotten into using it very much yet - but it is easy to assemble and set-up - in spite of the somewhat brief and ambiguous instructions

this thing is junkdon't workits a pain in the butinstruction book is junk to

Alot was missing, parts and board labeled bad. Don't buy